Customers login

Greek version Greek version

Contact us to ask for a quote or place an order!


All sort of payments accepted!

Secure payments by PayPal
Frequency and output power can be adjusted per customer request in order to comply with local laws and regulations!

Safety remote control for Jet ski,Boats,Go Kart

 

Long range 1.5Km

An authorized person using the remote control can switch off a jet ski to avoid accident

 

Jet Ski safety receiver

Jet Ski safety receiver

Receiver

 

It is installed into the Jet Ski. It is able to receive two different codes.
Each code arms the corresponding relay.
The first relay is used for switching off the Jet ski to avoid accidents.
The second relay is connected to the beeper of the Jet ski to alert the rider.

 

Specifications
Frequency: 138.250-138.400 MHz
Sensitivity: -116 dbm
Demodulation: FSK
Code: 5 x 6 bits
Supply: 12V DC 50mA

2 Relays with conntact 12Α @ 230V
Range: >1500 m
Protection: IP65

 

 

 

 

4/8 channels VHF transmitter

4/8 channels VHF transmitter

 

Transmitter

 

The handheld transmitter is equipped with 4 pairs of buttons.
The first button of each pair alerts the rider while the second button turns off the Jet Ski.
It controls up to 4 Jet Skis.
An option is to use all 8 buttons to turn off 8 Jet Skis.
In this case it is not possible to have and “beeper alert” function.

 

Specifications
Frequency: 138.250 – 138.400 MHz
RFpower: 10mW ERP
Modulation: FSK
Code: 5 X 6 bits
Supply: 9V alkaline battery (not included)
Internal beeper sounds when the buttons are pressed.
Is equipped with synthetic leather case.

 

 

 

 


Instructions

 

 

 

 

1-7JETSKI VHF transmitter

1-7JETSKI VHF transmitter

 

NEW!!!
Transmitter

 

The handheld transmitter is equipped with eight buttons: “1” “2” “3” “4” “5” “6” “7” “8/MODE” used to operate the remote control receiver, as shown.
Press “8/MODE” button momentary, then press one of the other buttons, to make the buzzer of the corresponding Jet Ski, sounds. Stop pressing the button to stop the buzzer.
In order to stop the engine, press the same button as previous, without pressing first “8/MODE” button, for 1-2 sec.
The driver can start the engine after 8-10 sec.
The buttons are membrane type for protection against moisture and water.

 

Specifications
Frequency: 138.250 – 138.400 MHz
RFpower: 10mW ERP
Modulation: FSK
Code: 5 X 6 bits
Supply: 9V alkaline battery (not included)
A LED light flases when the buttons are pressed.
Is equipped with synthetic leather case.


Instructions